基于实数遗传算法的列车优化操纵曲线研究

列车优化操纵是列车节能控制的关键问题，以列车运行动力学方程和牵引计算理论为基础，结合列车运行过程中的要求，构建以能耗、时分误差、限速等为目标的列车节能控制模型，采用实数遗传算法，通过Visual Basic编程对此问题进行求解。在已知列车编组的条件下，以DF4型内燃机车牵引客车、空气制动和燃油量曲线为基础，得到给定运行时间、距离条件下的优化操纵曲线，从而对司机操纵给出指导性意见。     

技术站广义配流问题模型与算法

根据列车解编顺序是否确定,将阶段计划中的广义配流问题分为广义静态配流问题和广义动态配流问题。以阶段内发出配流车数最多和车辆在站平均停留时间最短为目标函数,以列车解体开始时刻、车流分配、车流接续和列车编组开始时刻为约束条件,建立广义动态配流问题的多目标非线性混合整数规划模型。综合考虑优先排空、优先发送较近编组去向车流,模拟车站调度员编制阶段计划时的思维过程,设计搜索算法,解决广义静态配流问题(给定列车解编顺序的广义动态配流问题)。以有7个编组去向的某技术站为例,运用该算法可以在较短时间内得到列车解编方案和配流方案,表明了该算法的实用性和可行性。     

小波变换在管道泄漏点定位中的应用

当管道发生泄漏时，泄漏诱发的负压波传播到管道上下游监测点时会使该点压力信号幅值产生瞬态下降，利用小波变换模极大值检测压力信号的突变点，从而计算出管道泄漏诱发的负压波传播到上下游监测点的时间差。在MATLAB6．1软件环境下，以某次实验数据为例进行管道泄漏点定位研究。在计算过程中小波基函数选取为Haar小波，尺度水平为6，计算结果表明该方法可以计算出管道泄漏点处诱发的负压波传播到管道上游监测点的时间差，从而为准确定位泄漏点提供了基础。     

Large-scale evacuation network optimization: a bi-level control method with uncertain arterial demand

To improve the efficiency of large-scale evacuations, a network aggregation method and a bi-level optimization control method are proposed in this paper. The network aggregation method indicates the uncertain evacuation demand on the arterial sub-network and balances accuracy and efficiency by refining local road sub-networks. The bi-level optimization control method is developed to reconfigure the aggregated network from both supply and demand sides with contraflow and conflict elimination. The main purpose of this control method is to make the arterial sub-network to be served without congestion and interruption. Then, a corresponding bi-objective network flow model is presented in a static manner for an oversaturated network, and a Genetic Algorithm-based solution method is used to solve the evacuation problem. The numerical results from optimizing a city-scale evacuation network for a super typhoon justify the validity and usefulness of the network aggregation and optimization control methods.     

基于改进BP-GA方法的FPSO舷侧结构耐撞性能优化设计

基于遗传算法和ABAQUS参数化有限元仿真技术,对传统的BP-GA优化方法进行改进,并采用改进的BP-GA方法对浮式生产储油卸油装置(FPSO)舷侧结构的耐撞性能进行优化,以验证其可行性和准确性。结果表明,与传统的BP神经网络相比,经遗传算法优化的BP神经网络具有更高的预测精度和更强的泛化能力;改进的BP-GA优化方法可在结构减重的基础上进一步提高结构的耐撞性能,能较好地适用于复杂的FPSO舷侧结构耐撞性优化设计。采用的优化方法具有通用性,可为抗爆性能的优化设计提供参考。     

Highway voting system: Embracing a possible paradigm shift in traffic data acquisition

The integration of internet and mobile phones has opened the door to a new wave of utilizing private vehicles as probes not only for performance evaluation but for traffic control as well, gradually replacing the role of traffic surveillance systems as the dominant source of traffic data. To prepare for such a paradigm shift, one needs to overcome some key institutional barriers, in particular, the privacy issue. A Highway Voting System (HVS) is proposed to address this issue in which drivers provide link- and/or path-based vehicle data to the traffic management system in the form of “votes” in order to receive favorable service from traffic control. The proposed HVS offers a platform that links data from individual vehicles directly with traffic control. In the system, traffic control responds to voting vehicles in a way similar to the current system responding to prioritized vehicles and providing the requested services accordingly. We show in the paper that the proposed “voting” system can effectively resolve the privacy issue which often hampers traffic engineers from getting detailed data from drivers. Strategies to entice drivers into “voting” so as to increase the market penetration level under all traffic conditions are discussed. Though the focus of the paper is on addressing the institutional issues associated with data acquisition from individual vehicles, other research topics associated with the proposed system are identified. Two examples are given to demonstrate the impact of the proposed system on algorithm development and traffic control.     

基于模糊PID控制的ABS仿真研究

以车轮滑移率为控制对象,分析了模糊控制的理论基础,将传统的模糊控制与经典的PID控制相结合,提出了白适应模糊PID控制算法,并进行了仿真研究.     

基于遗传算法的舰船航速模糊控制研究

研究并建立了舰船航速控制系统的数学模型,并将模糊控制理论应用到该系统,提出了一种基于遗传算法的舰船航速模糊控制新方法。该方法较常规的模糊控制具有更优的控制性能,仿真实验结果表明该方法可行、有效。     

CATIA VBA二次开发在装配中批量搜索零件的应用

文章针对汽车开发过程中,经常需要对部分特定的零件进行批量选择用于校核或者作为报告用图,给出了装配中对指定的多个零件进行程序搜索选定的方法。在介绍VB编程语言及CATIA二次开发理论的基础上,给出程序自动搜索零件的基本流程,利用CATIA Automation调用Search方法,实现零件的批量搜索。通过实例验证,证明了CATIA批量搜索的优越性。结果表明,CATIA二次开发可以提高工作效率。     

异步电机效率优化算法设计

针对异步电机效率优化问题，提出混合在线式直流最小功率模糊搜索效率优化控制算法（FLSC）。算法利用损耗模型控制（LMC）的研究成果，设计新型比例因子提取策略，可以实时在线获得电机各稳态工况下FLSC输入和输出变量的比例因子，预先规划了算法搜索控制的方向，保证了算法的快速收敛性。根据异步电机的特性及先期的综合实验数据分析，对模糊控制用模糊集合及其隶属度函数进行系统化设计，对输入变量的ZE模糊集进行梯形隶属度函数设计，对输出变量进行正负不对称隶属度函数设计，从而解决了系统在效率最优点处的振荡问题。对小功率异步电机系统的计算机仿真及台架实验表明：针对异步电机的轻载运行工况，FLSC算法能显著提高异步电机系统的控制性能；对于异步电机转子电阻参数变化的工况也具有很好的鲁棒性。